You are here: Home Business e-Commerce Ceramic ball mill worth looking forward to the future

Ceramic ball mill worth looking forward to the future

February 8, 2012

Magnetic separator magnetic sheet strength are generally 3800-4500 Gauss, specification 750 * 2200-2400, so that the matching in order to achieve 90% of the net selection rate.Washed role is to improv




FOR IMMEDIATE RELEASE
(Free-Press-Release.com) February 8, 2012 -- Ceramic ball mill worth looking forward to the future-Lilacy191

Magnetic separator magnetic sheet strength are generally 3800-4500 Gauss, specification 750 * 2200-2400, so that the matching in order to achieve 90% of the net selection rate.Washed role is to improve the taste of the hair iron, and generally can be adjusted freely between 30-45. The role of the tailing out of the system will choose to go to iron Tailings discharged to a place away from the machinery to ensure that the mechanical energy of the normal work. Generally Gravity Conveyor, pumping sand pump in three forms, of course, this is also according to the specific environment of the river to set. The power of this set of processing machinery, general motors, erection of power difficult river to go with the 50-75KW generator sets.

Wet permanent magnet drum magnetic separator mainly composed of cylindrical, roller, roller brush, magnetic system, tank, transmission part of the six components. Cylinder by 2-3mm stainless steel coils, welded tube, end caps for aluminum casting or workpiece connected with stainless steel screws and barrel. Motor through reducer or directly with stepless speed regulation motor driven cylinder, magnetic roller and brush roller for rotational movement. The magnetic system for the open magnetic system, mounted on the cylinder and exposed magnetic. Magnetic blocks with stainless steel bolts installed on the floor of the yoke, yoke shaft stretched tube, the shaft end fixed Shui arm. Pulled Shui arm can adjust the angle of the magnetic system can be used to adjust the appropriate lever fixed. The work area of the tank with stainless steel plate rack and other parts of the tank with an ordinary steel welding.

Its magnetic by the magnetic poles and magnetic guides constitute domestic ferrite permanent magnet specification generally 85mm × 65mm × 17mm or 85mm × 65mm × 20mm or 85mm × 65mm × 22mm and so on, was flat and the shape of two 85mm ×65mm large area of the pole, of course, one side is N pole then the other side must S pole. Design magnetic separator ministries size of the magnetic system is a combination of magnetic block size considered, the magnetic poles the width of the available number of pieces of magnetic blocks side by side to achieve the pole height is the number of magnet stack together to form the Such as pole wide as 260mm, available 65 × 4:260 four magnets along the 65mm size side by side; if the pole height is 85mm, available 17mm thick magnets 5 pile together can. Magnetic block two polar size may differ slightly upward polar slightly larger, the width of the pole above this pile up some slightly narrow on the guide board underside. The smaller pole than the cylinder length along the axial length of the drum magnetic separator at both ends of the barrel, leaving a certain gap, the remaining length of the magnetic poles. For example, φ600mm and × 900mm, magnetic separator, the magnetic poles along the axial length of 850mm, 85mm direction parallel to the 10 magnetic blocks along. Case of pole size 850mm × 260mm × 85mm, the axial 85mm × l0mm very wide 65mm × 4mm high as 17mm × 5mm, and a pole magnetic number of blocks of 10 × 4 × 5 = 200 block, this pole is a big magnet on the surface of a magnetic pole, the underside of another pole. The other pole is composed of.
Ceramic ball mill worth looking forward to the future-Lilacy191
Trituradora de martillo de etapa única:http://www.xingbang.es/es/6.html
Super Pressure Trapezium Grinding Mill:http://www.chinazhongke.net/Grinding-mill/21.html
Ring Hammer Crusher:http://www.china-xingbang.com/36.html
Trituradora de cono:http://www.chinazhongke.net/esp/6.html


free-press-release.com ceramic ball mill

Share |


Contact Information

  • Name: Lilacy191 Zhang

    Company: www.china-xingbang.com

    Telephone: +8613683809990

    Email: ***@163.com


  • About the author

    simple can reply on

People who viewed this press release also interested in the following topics: hidrolik ceramic press.




Upcoming Trade ShowNew Press NewsNew Exclusive News More Press News

  • CIAB When: 2012.06.01~2012.06.01
    Where: São Paulo,Brazil
    Industry: Business Services
  • PRIMA-Messe When: 2012.06.01~2012.06.03
    Where: Kyritz,Germany
    Industry:
  • FAMILY / SEIMYNELE When: 2012.06.01~2012.06.03
    Where: Klaipeda,Lithuania
    Industry:


  • Post your news to the World.See you news here immediately. It's easy and free!
    Create free account or Login.