Fixed Optical attenuator, Fixed In-line Optical Attenuator

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) April 15, 2010 -- Fixed in line attenuator is used in optical systems where the optical power from a source is too high for the test equipment in use. it introduces an in-line fixed loss that will reduce the source power to an acceptable detection level. The attenuation level should be stable with temperature and wavelength for a stable reliable system.

The Fixed in-Line Attenuators are a compact passive fiber optical component that provides accurate attenuation. They are base on Fused Biconical Taper (FBT) technology. Our Fixed in-line attenuators series come with your choice of different connector terminations, including FC, SC, ST, or other type of connectors specified. With the patented mode filter design, they can enhance mode stability dramatically and be readily panel mounted without any dummy fiber.

http://www.twfiberoptic.com/Fixed_In_Line_Type_Attenuator.html

LFO provides a wide range of singlemode and multimode Fixed in-line Attenuators. They are used directly on the fiber optic connectors and provide a fixed level of optical attenuation. Single mode fiber based Fixed in-line attenuators with single window (1310nm or 1550nm) or dual window (1310nm&1550nm). Multimode fiber based Fixed in-line attenuators with single window (850nm or 1310nm). FC and SC fiber connector types with PC or APC polish are available, as well as ST and LC types of attenuators.

http://www.twfiberoptic.com

Fixed Optical Attenuator