FOR IMMEDIATE RELEASE
(Free-Press-Release.com) January 22, 2010 -- For February 2010 Release



FOR FEBUARY RELEASE:



“Foul Release” Protection on Hull in Minutes.

Almost 1 Million boats, globally, have used this unique “Foul Release” hull wax.

Applied “in minutes” to any hull, Easy-Spray Hull Wax provides extra performance, full season protection and a more easily cleanable surface.



The thinner it is applied the better it works!



This technology, in its wax like liquid form, has a positive charge. Once applied, with a soft cloth, to the hull, which is obviously a negative charge, it forms an instant molecular bond.

A 14oz (400ml) spray bottle will treat up to a 24ft hull and

can be applied to fiberglass, aluminum, wood, fabric inflatables and boat fenders. MSR $39.95

Easy-Spray, which carries Ecologo, was developed as an alternative to antifouling paints, cures in a matter of minutes, to a polishable surface, that tends to self clean with the movement of the boat through the water. If you are really lazy, leave the coating for a day and it will polish itself!



This clear surface is now repelling the water from the hull resulting in less fouling, higher performance, less fuel usage and as users attest “It cleans so easily!”



This same technology kept barnacles off plates for over 40 days in Miami Research test facilities in Biscayne Bay . It is rated for full time freshwater and intermittent

salt water (trailered & racked boats, high performance, pontoons and inflatables) use.



The New Zealand Coast Guard reported 2 MPH better top speed over a measured course.



Regular maintenance is recommended during the season. Pull into shallow water, or turn the boat at the dock and sponge or soft deck brush off the fuzz on hull and outdrives as required.

At the end of the season this underwater coating can be deck brushed, pressure washed, acid washed and it will still be there. Once the hull is clean and dry, simply apply one more thin coat and your boat is ready to go for another season. If for some reason you need to remove this protective coating, simply use a high PH 13.5 wax stripper.

All this, convenient DIY “foul release” protection, for less than $2.00.

For more information:

Bill Milne

Alex Milne Associates Ltd

www.alexmilne.com

billmilne@look.ca 1-800-563-5947