Henan prospecting mandibles crusher instructions

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) February 12, 2012 --

Sand washerArial Unicode MS","sans-serif"Cement equipment;"> Jaw crusher is using two type ore slabs of extrusion and jaw materials bend role, crushing or broken all kinds of hardness materials in the rubble machinery. The rubble by fixed jaw plate and institutions can move jaw plate compositioStone crushern, when two jaw plate material that is close to being broken when, when two jaw plate leave less than discharging the mouth piece of material from the bottomSymons cone crusher>. It is the intermittent movement of the broken. The hammer apparatus for a simple construction, reliable and can break the hard material advantages and is widely used in dressing, building materials, silicate and ceramics industrial department. Cone type ore crusher apply to break in the rubble finely homework or mechanical.

Primary crushersBelt conveyorot;sans-serif"">And the smaller the homework in discharging the uniformity of the particle size is usually better than crushing operational requirements of high, therefore, in the bottom of the crushing cavity will establish a parallel area, at the same time, still must speed up the broken cone spinning back speOre vibrating feedered, so that the material in the parallel by more than one extrusionBelt conveyorot;Arial Unicode MS","sans-serif"">.

Cement plantquot;sans-serif&Cement plant"sans-serif"">.
2, carefully check all the fastening pieces are fully tighten.
3, protective device are good, unsafe phenoVibrating grizzly feedermenon, shall be immediately eliminate.
4, check the broken cavity or other sundry without ore, if have, shall be immediately eliminate.
(2) jaw crusher of starting
1, through inspection, prove machine and transmission part of the normal situChina mobile crushersation, only starting.
Cement plant/> 2, the machine can only in no load cases starting.

3, startup, if discover the abnormal situation, should stop immediately, to clarify the cause eliminate hidden dangers, before starting again.
(3) jaw crusher maintenance and use
1 normal operation, crusher, and then feed.
2, stay broken material should be evenly to join broken cavity, and should avoid side charging, avoid load mutation or unilateral sudden increase.
3, in normal working circumstances, the rise of temperature of the bearing should not be more than 30 ℃, the highest temperature should not be more than 70 ℃, or should be to stop immediately, find out the reason to eliminate them.

4, before parking, should first stop charging, wait for crushing cavity in broken material completely empty, and then close the motor.



Limestone rotary kiln：www.hxjqcrusher.com/Rotary-kiln.html
Ore separating line：www.hxjqcrusher.com/crusher/Ore-separating-line.html
China vibrating feeder：www.hxjqcrusher.com/crusher/China-vibrating-feeder.html


Impact stone crusher：www.china-crusher.com/impact-breaker1.html
Impact stone crusher：www.china-crusher.com/impact-breaker1.html
Impact stone crusher：www.china-crusher.com/impact-breaker1.html