How do we solve the problems occurred in bucket elevator?

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) December 30, 2011 -- Hoist material is refers to the materials in a back to unloading position not fully discharged cake layer,Rock crushing plant and there are parts of the material in the seat back to ascend conveying rate phenomenon. In the ascent assignments, if dou type hoist material back too much, certainly will reduce the production efficiency,Screw classifier increase power consumption and material of broken rate. The reason as the following:

1, hopper run too fast hoist ascension of different material, hopper speed is different: generally improve dry powder and grain of material,Ball mill at around 1 ~ 2 m/s; Ascension block material, the speed of 0.4 ~ 0.Stone crushing plant6 m/s; Ascension wet powder and grain of material, the speed of 0.Ore separating line6 ~ 0.8 m/s. Speed is too large, unloaded in advance, cause back to the material.Ore flotation equipment At this time of ascension shall be according to the material, properly reduce the speed of the hopper, avoid back to the material.
2,raymond mill head of the export unloading tongue plate installation not appropriate, tongue plate material unloading location from hopper too far, can cause back to the material. Should be timely adjust tongue board position, avoid back to the material.
Vibrating screen：www.china-crusher.com/c-vibrating-screen1.html
Jaw crusher supplier：www.hxjqcrusher.com/Jaw-crusher.html
China spiral classifier：www.hxjqcrusher.com/crusher/Screw-classifier.html

ball mill     Sand maker     vibrating screen     Vibrating Screener