How does flotation machine work?

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) February 16, 2012 --

The flotation machine is mainly used for sorting copper, zinc, lead, nickel, gold,Rock crusher and other nonferrous metal, can also be used for black metallic and nonmetallic the cyclones and selection. By motor drive transmission washing vee belt impeller spinning, produce centrifugal formation negative pressure, on the one hand, inhaled plenty of air to pulp mixed, on the one hand,Drum dryer mixing the pulp and drug combinations, and at the same time refining bubble, make mineral bonding foam on, float to the pulp face and form the mineralization bubble. Adjusting disc height, control liquid surface, the useful bubble was scraper blow out.Artificial sand washer
Coal slime and agent after fully mixing into the first room, the flotation machine under the slot, rotating impeller, formed in the cavity in the round of negative pressure, making under the pulp and groove slot respectively by the impeller under the mouthpiece and on into the mouthpiece of the mixed zone, and also makes the air along the gas leading sleeve access of the mixed zone,Limestone dryer pulp, air and elixir here mix.

In the impeller under the action of centrifugal force, the mixed into the pulp mineralization zone, air to create bubbles and shatter, coal and grain full access,Ore spiral classifier form the mineralization bubble, in the stator and turbulent board under the action of evenly distributed in slot section,Ore vibrating feeder and moving up into the separate area, enrichment to create foam layer, by scraping the bubble institutions eduction, forming plant bubble.

Sorting turn ring slow rotation, when sorting room into the float area, this time in pulp material is respectively to six to distributor sorting point, weak magnetic mineral grain is sucked in the tooth board and with the sorting ring turn.Sand maker The magnetic mineral grains in gravity to pulp flow under the function of gear plate after the aperture, into the bottom of the tailings sorting ring grooves. Separation middlings turns to clean room position, a small amount into cleaning water, will the inclusion gangue, even had body and exploratory experiment washed to the tailings slot (the machine not set separation middlings slots), in order to achieve the purpose of improving the concentrate quality. When sorting room turned to magnetic field is very weak position (concentrate flushing area), injected water pressure, will suck in the teeth of the weak magnetic board ore concentrate grain into the slot. Then separation chamber turn to another of the opposite polarity magnetic field area, sorting ring a week each turn, each of them sorting room so repeated six times.
Groove bottom is not above mineralization of coal will be through the cycle of holes and on the mouthpiece again mix, mineralization and separation. Under the slot is not part of the impeller inhaled pulp, through the buried in the pulp middlings in the second box of under room slot, and complete the first room after all the process, into the third chamber, the flotation machine so round and round, pulp through the last room to tailings discharge box eventually tailings.

Spiral separator：www.hxjqcrusher.com/crusher/Screw-classifier.html

Cement mill：www.china-crusher.com/cement-mill5.html
Jaw breaker：www.china-crusher.com/product.html