HP-02 Refillable Cartridges usage Details at www.inktonersusa.com

FOR IMMEDIATE RELEASE
Los Angeles, California, United States of America (Free-Press-Release.com) December 22, 2010 -- Our R & D department is currently testing those cartridges. We
do not support the refilling of the Hp 02 cartridges at this time. We have
not found a way to reset the chip on your original Hp 02 cartridges.
Our suggestion is to buy a set of Hp 02 empty refillable cartridges. We
have a combo pack set of 6 cartridges that are refillable with a chip that
will automatically reset back to full when the cartridge is refilled.
We recommend that you purchase empty refillable cartridges by
going to our web store www.inktonersusa.com

Purchase Hp 02 Combo Pack
You can refill them over and over again with our inks. There is a little door
on the back, that you open, pour in our ink and then close the door and
use. First buy empties that are refillable and Use Black pigment for the
black cartridge, Use Cyan, Magenta, Yellow, Light Cyan which is Photo
Cyan and Light Magenta which is Photo Magenta. The refill instructions
listed below are for these refillable cartridges.

Refillable HP-02 Inkjet Cartridges: (Note: refillable cartridges come with

no ink) (These cartridges have an auto reset chip and do not need a chip
resetter) Auto reset means, when the cartridge is removed, refilled, and
replaced back into the printer the chip will read full again.

2. S-l-o-w-l-y inject the ink into the filling hole of the cartridge until the
cartridge is filled about ¼ inch for the top. Holding the bottle upside down, it
is 5 mls from the top to the first marker line and then 3 mls each marker line. The
bottle has 65mls of ink.
The black cartridge will take approximately 35ml
The color cartridges will take approximately 12ml each
Use Black dye for black

Photo Magenta for LM (light magenta)
Photo Cyan for LC (light cyan)
Yellow for yellow
Cyan for cyan
Magenta for magenta
3. Reinsert the small rubber plug back into the filling hole. Be sure that it is
pushed in well. Push and twist at the same time.
4. The cartridge is now filled and ready to use.
When the cartridge is removed (removing power from the chip) and
reinstalled back into the printer the chip will reset back to full. Important
Notice...Refill your cartridge before it reads empty. These printers can get

an air lock in the printhead so you don't want it to pull in any air from an
empty cartridge.

WARNING: Failure to follow these instructions precisely can ruin your printer!
It is vital that you do not let a refilled #02 cartridge run out of ink!
These cartridges contain a microchip which counts the amount of ink used. Under normal
conditions, the cartridge is refilled when the ink has been used. A normal cartridge will
still have ink remaining when the level reads "ink out". This is important because the
printer does not have a backup method of determining when the cartridge is out of

ink! Don't wait till the last moment to refill your cartridge!
If the cartridge truly runs out of ink, air will be pulled into the printhead, possibly causing
a "fatal printer error". Therefore, it is important to not let your refilled cartridges run
out of ink!
Let us emphasize one more time: You must not let the refilled cartridges run out of ink!

More details at http://www.inktonersusa.com

ink     ink toner store     ink toners     inkjet refill machines     inkjet refilling     toner refilling