Hybrid Heat Exchanger

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) July 20, 2011 --

Hybrid heat exchanger is to rely upon hot and cold fluid's direct contact to heat transfer, this heat transfer way can avert the dirt resistance at the heat transfer partitions and both sides of partitions, so long as the contact between fluids is in very good condition, there will be greater heat transfer rate. As a result, any occasion that permits the fluid mixed with one another can make use of the hybrid heat exchanger , for example gas washing and cooling, circulating water cooling, the mixture heating between steam and water, steam condensation and so on. Its application is throughout the chemical and metallurgical enterprises, power engineering, air-conditioning engineering and several other manufacturing sectors.

 

In accordance with the different usages, hybrid heat exchanger can be divided into a few different types:

First, cooling tower

In such devices, people use natural ventilation or mechanical ventilation approaches to cool and reduce the water temperature increased temperature during the production in order to increase the economic benefits of the system. As an example, recycled water in thermal power plants or nuclear power plants, the cooling water in ammonia production, which through the temperature reduction within the cooling can be recycled to use, this approach has been far and widely used in the practical projects.

 

Second, gas scrubber

There are a variety of purposes using this equipment to wash the gas in industry, including using liquid to absorb certain components of gas mixture to remove the dust, to humidify or dry the gas. But its most widespread usage is to cooling gas, and most of the used cooling liquid is water. spray chamber is commonly used in air conditioning engineering, it can be considered as 1 of its special form. Spray chamber can not only cooling the air the same as gas scrubber, it also can do its heat treatment. Nevertheless, it also has high requirements on water quality and disadvantages like large area, high pump energy consumption: For this reason, in present general buildings, the spray chamber has been infrequently used or used only as the humidification device.

 

Third, spray heat exchangers

In this device, the higher pressure fluid is sprayed from the spray nozzle, and forming a high speed, low-pressure fluid is introduced into the mixing chamber and has the direct contact with the spray fluid and then undergo heat transfer, and together enter the diffusion tube, after reaching the same pressure and temperature at outlet of the diffusion tube, they would be sent to the user.

4th, mixed condenser

This equipment is most often using the way of the direct contacting with water and steam to make steam condensation.

heat exchanger     Hybrid heat exchanger