It Is Important to Seal Well in the End of Dryers

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) February 7, 2012 -- The following is the general principle of selection of the dryer:
1 a priority, simple structure, spare parts supply, high reliability,VSI sand maker service life long dry device
2, applicability, which can make the best selection of material before drying experiment, in-depth understanding of similar material have been used dry device, often the proper selection have help.

3,China magnetic separator the dryer first must be able to apply to certain materials, materials and meet the basic requirements of dry, and can satisfy the handling capacity, and to take off the water volume, product quality and so on basic requirements.China spiral classifier
4, low energy consumption, that is, different drying methods different energy index,Flotation separator general conduction drying washing stone machine theory of the thermal efficiency can reach 100%, only about 70% of streaming dry
5, lower cost, namely equipment depreciation, consumption and Labour, maintenance, spare parts fee, so try to operation cost is low.
6,Cement equipment and according to the installation area size to choose appropriate the dryer.
7, according to local the annual temperature, humidity choose appropriate the dryer.

In the cement rotary kiln process operation for the air quantity, fuel and material quantity between the three,China sand washer maintain a certain relation, to stabilize the thermal system, so as to improve the quality of the kiln production.Cement rotating dryer Therefore, in the cylinder body and kiln head and cylinder and end of the place, do well the seal is important. If kiln head leak into the excessive cold air, can reduce the clinker cooling equipment into the secondary air volume of the kiln, and reduce the time of air temperature, such not only clinker cooling is bad, and furnace temperature will also reduce the flame, which affect fuel combustion rate, increase the heat loss. If the end of the leak, because it is the biggest place kiln negative pressure, easy inhalation a lot of cold air, and make large amounts of gas stove not easy eduction, the fuel can't complete combustion, leading to the thermal system damage, and increases the fuel consumption, still can reduce the kiln production quality.
China magnetic separator：www.hxjqcrusher.com/crusher/China-magnetic-separator.html
Concentrator table：www.china-crusher.com/table-concentrator5.html
Drum dryer：www.hxjqcrusher.com/Dryer.html