Jaw crusher lubrication must pay special attention-Ivylm520

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) January 9, 2012 --

Henan prosperous for slag processing, machinery Co., Ltd. Henan prosperous professional production of such equipment, such as the European version of the jaw crusher, hydraulic cone crusher, cone crusher prosperous, LM vertical milling machine. Through well-designed production line, slag can be effectively handled, broken lines using magnetic master, chain, monitoring system, to achieve a fully automated production, production more scientific and rational, easier to use, greatly improving the productivity of labor; production line The slag crushing and dust removal device delivery system is installed, take a closed operation, effectively reducing dust emissions. The entire production process from two jaw crusher, a fine break CS series cone crusher, five iron, five screening etc., form a "three-breaking five selected five screening" deep processing of slag granulation process, the magnetic selection ability, good recovery of ferrite, ferrite content in tailings reduced by 17% or less, greatly improving the active ingredient bean powder steel and steel production. All steel and steel powder beans back to steel plant melted steel, molten steel slag change will further reduce the cost of smelting.

The series crusher (crocodile crusher) work for the squeeze-type dynamic song, its working principle is: Motor drives belt and pulley, so that moving the jaw by the eccentric shaft moves up and down when moving jaw rises between toggle plate and moving jaw angle becomes larger, thus promoting the moving jaw plate close to the fixed jaw plate, with the same time the material is crushed or split pieces, to crushing (crushing machine price) purpose; when moving jaw down, the angle between toggle plate and moving jaw becomes small, fixed jaw plate in the bar, under the action of the spring, leave the fixed jaw plate, this time under the broken material from the crushing chamber discharge port. With the continuous rotation of the motor for the periodic motion of mobile jaw crusher crushing and waste material, to achieve mass production.

Crusher in the work process, the friction surface should be timely and reliable lubrication to ensure the normal operation of long-crusher. Therefore, the lubricating parts of the lubrication must pay special attention. Otherwise it will cause an accident, or even accidents. To reciprocate the movable jaw crusher bearings and thrust plate and bearings with lubrication, generally dry oil lubrication. In the winter, such as the case may be dry when the oil has solidified, where you can then add 20% (by weight) of automotive lubricants for lubrication. Lubrication of the contact surface must be comprehensive, uniform. Within the bearing seat in the full extent of oil should not exceed 50-70% of its volume. According to run usage, can fill oiling once every 1-2 days, once each quarter for the best lubricant. Meanwhile, the bearing after washing thoroughly checked. Proven to increase oil change schedule is filled to extend the service life of bearings and other parts.


Jaw Crusher: http://www.chinazhongke.net

chancadora de piedra: http://www.xingbang.es

Immpact Crusher: http://www.china-xingbang.com/37.htm