KANOX®- Fire Retardant Fabric and Flame Retardant Fabric for Heat Insulation, Chemical Resistant, Anti-Static Fabric.

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) May 16, 2011 -- KANOX® fire retardant fabric is hybrid blended with Aramid fiber, pre-oxidized PAN blended, and/or high strength fibers. The genuine fire resistant fabric has the properties of fire resistance, heat insulation, anti-static and environment friendliness. The high performance flame resistant fabric is excellent for fire fighting clothing.

KANOX FIRE RESISTANT FABRIC IN SPECIFYING THE OUTER SHELL WHAT IS SPECIAL ABOUT THE KANOX FIRE RESISTANT FABRIC ?

1 2 3

KANOX®- Fire Retardant Fabric and Flame Retardant Fabric for Heat Insulation, Chemical Resistant, Anti-Static Fabric.

Welcome visit Our WebSite:

http://fire-retardant-fabric.ready-online.com/

KANOX fire resistant fabric utilizes high tech fire resistant fiber and spinning techniques to produce the most suitable firefighter apparel and other related types of fabric; aluminum coated, rubber coated, non-woven cloth, and the inner liner are designed for firefighters. After flamed, the KANOX fire resistant fabric will not enkindle, melt, nor curl, and it leaves little damage to the surface of the fabric. With a thickness of 2mm and 3mm, the KANOX non-woven cloth is fabricated so it is not only light but also perfect for heat insulating to eliminate cauterization. KANOX fire resistant inner layer and outer shell can stand up to intense heat so they are non melting, non curling, non sticking, and the best of all, they can improve the overall safety of firefighter garment.

When flaming for more than 3 minutes, the burning area doesn't increase nor get carbonized, and that is what Kanox fire resistant fabric is all about. Even after flamed, KANOX fire resistant fabric has the smallest damage compared to other fire resistant fabric available on the market today. All of these qualities can provide protections that greatly decrease the chance of danger for firefighting heroes.

Properties Of KANOX® - http://fire-retardant-fabric.ready-online.com/ KANOX® fire retardant fabric.

After flamed, KANOX® fire resistant fabric has limited damages compare to other fire resistant fabrics that are available in the market. Flame resistance, heat resistance, thermal resistance, tensile strength, and water vapour resistance are often the determining factors in choosing fire resistant fabrics, and KANOX® fire resistant fabric has all the characters.

Thermal Protection Performances (TPP) is composite measures of four layers of turnout gear. The higher TPP value you see, the higher thermal protection performance it is. NFPA 1971 norm requires a TPP value of no less than 35. KANOX® fire resistant fabrics rate TPP value 45-47, much higher than NFPA 1971 requirement and most fire resistant fabrics in the market.

KANOX® fire retardant fabric is a flame retardant fabric with 50 to 60 L.O.I., and its light weight and outstanding thermal stability has made it applicable for making unique turnout gear.

The Kanox fabrics provide greater thermal stability and enhance insulation at similar weights as the most conventional materials. The High L.O.I. Level to help people more effectively blocks out heat. Kanox fabric offers a unique heat blocking performance, and the best balance of weight, TPP and total heat loss.

Ultimate in thermal protection
The heat stops here, bring you a peace of mind. flame resistance & heat insulation test offered the more confident you feel in the protection, you have on you mine.

Testing material:KANOX-NW3 non-woven fabric 3mm 450g/m2
Room temperature:34°C Testing condition: Direct flame contact (ave. 1020°C)with sample material, average temp. 74°C was Measured on side opposite flame with probe at 1 "from the material."

Testing result: An initial temp of 34°C and end temp of 91°C were measured after 3 min, direct flame contact, No burn-through or melting on the material. KANOX non-woven fabric proved to be an excellent flame resistant and hat isolative material.

KANOX® fire retardant fabric has passed tests and obtained certifications to prove its great performances. (No melting no burn-through, no shrinkage after 1 minute). It is EN 470-1, EN 531, EN 11611, EN11612, EN15384, EN1149, EN 469, UL listed passing NFPA-1971 standards.

KANOX® Fire Retardant Fabric - Types of Applications
Fire Fighting Hood
Fire Fighting Helmet
Fire Fighting Boots
Fire Fighting Gloves
Fire Retardant Clothing
Forest Fire Fighting Clothing
Fire Resistant Clothing in different fields

Emergency Fire Blanket / Welding Blanket
Fire Blocker for airplane interior decoration

Taiwan K.K. Corp. hi-tech textile department was established, years later, they have become a fire retardant fabric (KANOX® & MAZIC®) leader in providing safety garments for fire fighting, refinery, gas, cement, metal, and welding industries.Please visit http://fire-retardant-fabric.ready-online.com/ to know more about KANOX® fire retardant fabric.

Taiwan K.K.Corp. Hi-Tech Textile Department's fire resistant fiber & its' yarn development through R & D divisions, Taiwan K.K. is able to extend its enterprise to serve different industries like the military, the law enforcement, and the industrial factories.

Taiwan K.K. Corp. - hi-tech textile department
http://fire-retardant-fabric.ready-online.com/
FL.5., No.14, Lane 235, Pao-Chiao Rd.,
Hsin-Tien City, Taipei, Taiwan

More information can be found online at http://fire-retardant-fabric.ready-online.com/

Fire Fighting     fire resistant fiber     fire retardant     fire retardant clothing     Fire Retardant Fabric     firefighter apparel     flame retardant     Flame Retardant Fabric