New Product Release Turn-key GSM-HEATING-Controller with Radio Control and 30 amp Relay capability and power supply included

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) May 1, 2011 -- The New GSM Switch has been developed to include both GSM remote operation of a single Output Relay using a Land-Line or a Mobile Phone and also incorporates an R.F Receiver on board of which can be supplied in various frequencies to meet most countries regulatory compliance's.

The GSM Switch system has a 30 amp Rated incorporated to be able to switch up to 20 amp heating and lighting circuits and has normally open and closed contacted so as to be able to connect or disconnect systems as required remotely from either a Mobile Phone or Land Line

1

New Product Release Turn-key GSM-HEATING-Controller with Radio Control and 30 amp Relay capability and power supply included

Welcome visit Our WebSite:

http://www.gsm-switch.com

The GSM mode of the GSM Switch permits the output relay to be operated via a simple Phone Call to the unit in either open mode in which any caller can activate the relay or also by the security mode which restricts the access to up to 250 users that can be stored in the memory of the unit

These numbers are identified as authorized user numbers and can be added & deleted remotely via S.M.S by the administrator or also from a P.C by using the software package supplied with the "GSM Switch" system.

The Relay can also be pre-set to activate for a set period of any time from 1 second up to 18 hours whenever the GSM Switch is called and this preset time can be Remotely changed via S.M.S or using the Software Program

The relay can also be activated temporary or permanently on and off via S.M.S without effecting the default time settings.

In addition the GSM Switch also allows the caller to be informed by S.M.S whenever the relay has been activated and when it has been de-activated and this function is especially useful when controlling remote devices where t he confirmation that they are working is vital.

he R.F function of the GSM Switch is designed to either mirror the GSM default setting of the relay or can be used to override the relay in the in both the on and the off mode locally up to the range of the R.F in its particular location.

This override via R.F in this instance can be very useful for when a device has been activated via GSM mode remotely and needs to be de-activated once back on site which
can be done via the Remote handset without the requiring to use the Mobile Phone.

In addition the R.F function also provides an important back up for the GSM Mode in the event of a Network System failure or in the case where a Sim Card number has been expired and has been barred by the Network.

Situations like these can render the sole reliance of GSM control for the only form of access a venerable situation and when a R.F back up becomes an essential.

The R.F can also be incorporated into a local Keypad so as all of the GSM and R.F are communicating with the same control unit.

The GSM Switch has a full dual battery back up system that will support up to 8 hours of standby for both the R.F and the GSM system controls and both work independent of each other, thus you always have an option for access or control.

The GSM Switch can also alert you via S.M.S when the main power has been removed and when it has been restored.

Specifications

Quad Band GSM850-GSM900-GSM1800-GSM1900.

12-24 Volt D.C 1.5 amp Power supplied included on board as an option to be supplied with or without

Current Consumption 500 mA Max 55 mA Normal
.
Operating Temperature minus 20 to plus 55.

Humidity less then 80% RH.

Battery Back up 2,500 mA 8 hour Standby running.

Cadium back up 5 year battery life.

Fused Protection to board at 2 Amps Low Voltage

Fused Protection High Voltage 10 amps

Relay Rated at 30 Amps.

R.F Receiver 433.MHz standard or 315 or 868 Options.

I.P 65 Rated external Enclosure

C.E Approval

1 Year Manufacturers Warranty


80-240 Volt AC On Board Power Supply

250 Caller ID Users

1 Output Relay 30 Amp Rated

Programmable via S.M.S or Software programming

Power down and Power restored alarms

GSM or R.F Remote control multi-function options

More information can be found online at http://www.gsm-switch.com

gsm-heating control     GSM-REMOTE-CONTROL