NXP LPC1758 ARM Cortex-M3 Evaluation Board

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) November 16, 2009 -- The LPC1758 evaluation board is based on ARM Cortex-M3 processor from NXP, its operating frequency is up to 100MHz, with 512KB high-speed on-Chip Flash Memory and 64KB RAM, together with a colour QVGA LCD, Ethernet, USB, CAN, SD/MMC card interface, and UARTs.
* 100MHz Cortex-M3, 512KB Flash,64KB SRAM
* 240x320 TFT LCD, 2.4"
* Plenty of example source code

Hardware Specifications:
1) Include one 2.4" TFT LCD (240*320)
2) NXP LPC1758, based on ARM Cortex-M3 Core, 100MHz
3) 512KB internal flash and 64KB SRAM
4) XTAL Frequency: 12 MHz

5) Two RS232 Interfaces
6) Two CAN Interfaces
7) One 10/100M Ethernet Interface
8) One ETM Interface
9) One Micro SD Card Interface
10) One USB Device Interface
11) One USB Host Interface
12) One USB OTG Interface
13) One 20pins JTAG Interface
14) One 10pins Cortex Debug Interface
15) One 18pins Cortex Debug Interface
16) One TFT LCD Interface
17) One Joystick with 4-direction control and selector
18) One Analog Output (connected to speaker by default)
19) One Analog Input (connected to potentiometer by default)

20) Supply Voltage: 5V DC (provided by the USB bus of a PC)
21) Supply Current: 65mA typical, 120mA maximum
22) Board Size: 119mm x 119mm (4.68" x 4.68")

More information about the nxp lpc1758 board: http://www.embedinfo.com/en/list.asp?id=38.

Other Product:
- Atmel MBC-SAM9G45 Core Board, based on the Atmel AT91SAM9G45: http://www.samicc.com/2010/0521/34.html

evaluation board for lpc1758     evaluation kit for lpc1758     nxp lpc1758 eval board