Safety usage instruction of high pressure pump

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) January 27, 2012 --

First,Raymond mill oil pump and jack with provisions to oil, oil work, generally for 10# or 20# machine oil, so can use other similar nature hydraulic oil, such as transformer oil etc. Into the tank must be approved by the oil filter. Often use per month when a filter, oil tank should be regularly cleaned.Rock crushers Commonly inside the tank should be kept about 85% of the oil level, low should be timely to add, add oil and the original of the oil pump should be the same number. The oil temperature in the tank shall in general be 10 ~ 40 ℃ with advisable, should not be used in the negative temperature.
Second, tubing in work under pressure to avoid bend. The oil pump and jack's fuel tank connection should be kept clean, do not use in the screw plugging seal, prevent sediment into,Rock crushers and the oil pump and jack exposed the nozzle to use nuts blocked, prevent the dust and debris into the machines. Daily is used up, the oil pump should be clean,Rock crushers clear the fear of cloth copper wire oil dirties.

Three, oil pump is unfavorable in work under overload, the relief valve must according to the rated hydraulic pressure equipment adjust, it is strictly prohibited to adjust.
Four, grounding power supply,Mineral impact crusher the cabinet must be ground, check line insulation situation before the test run.
Five, high pressure pump before operation, should the oil regulator first, then start the oil pump, stay empty normal load operation, then closed return oil valve, gradually spin twist JinYou stem,Mineral impact crusher increase the load, and pay attention to gauge pressure is normal or not.

Six, oil pump stop work, should first will return oil valve slowly loosen, slowly to pressure gauge back to zero, and then break out jack hose connector nut. When the load is prohibited in systems of tubing or pressure gauge,Mineral impact crusher etc.
Seven, with a double role oil pump jacks, to the road and the two oil pump quality.the type advisable.
Eight, oil resistant rubber hose must bear the high pressure, working pressure shall not be higher than the rating of the oil pump hydraulic or practical work of the biggest oil pressure. Tubing length not less than 2.5 m. When one oil pump drive when two sets of jack, the oil pipe specifications should be consistent.
Mineral impact crusher：www.china-crusher.com/impact-breaker1.html
Ore vibrating feeder：www.hxjqcrusher.com/crusher/China-vibrating-feeder.html

Ore vibrating feeder：www.hxjqcrusher.com/crusher/China-vibrating-feeder.html