Water Coolers Mistral : Optimized & Secured Direct Chill

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) February 14, 2011 -- Water Coolers Optimization by Mistral
Direct Chill technology is designed to continuously circulate fresh water, using two coils: one leading water and the other cold.
Over the years, Mistral Constructeur , water cooler french manufacturer, developed this technology by optimizing the contact area between the two coils: a perfect interleaving between the water coil and the cold coil established a larger contact surface.

Through its industry expertise, Mistral Constructeur optimized existing technology to make efficient and instantaneous cooling .

Water Coolers Security by Mistral
The coaxial traditional Direct Chill (meaning that the water pipe is inside the cold pipe for better refrigeration capacity) shows a water circuit risk of contamination by the refrigerant gas in case of regulation problem. An advantage of the Mistral Direct Chill is the separation of double pipe containing water, versus cooling gas. In case of leak from one pipe, it is impossible to have a pollution or contamination of water through the double wall.

On the other hand, Mistral Constructeur uses copper as a material for coils. Despite a higher cost, Mistral Constructeur chose copper for its medical virtues: copper is recognized and approved as an antibacterial agent able to fight against the bacteria proliferation which is infectious origin.
Namely, a surface copper kills all bacteria of infectious origin in fewer 2 hours.
Using copper as a pipe material, Mistral Constructeur provides to the customer, the guarantee of restricting the bacteria proliferation and the bio-film slowdown. With copper, the risk of water contamination , hospital by example, is significantly reduced.
Mistral Constructeur uses copper in water coolers manufacturing for its antibacterial effects. Mistral Constructeur’s water coolers are quality and hygienic.

direct chill     Manufacturer     Mistral     water     water cooler