Why I get no sound on playback after recording?

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) June 2, 2004 -- Why I get no sound on playback after recording?



It means that silence is recorded in the WAV file (the average volume is less than -80 dB).



If Built-In Mixer is used but recording is not tested you should test the recording first.



If Midi2Wav Recorder can not record any MIDI sound using Built-In Mixer then you should adjust your sound card mixer yourself.



To do that, please follow the instructions listed below:

1. Open menu Selecting Devices and Test Recording, select the first MIDI Output and Wave Input devices in the drop-down lists. Press Select Devices button.



2. Uncheck Use Built-In Mixer item.



3. Open Windows Volume Control Mixer or double click the speaker icon in the tray. The tray is the clock area of your Windows computer.



4. In Volume Control dialog check the Mute check-box for Microphone sliders



5. In Volume Control dialog select Options and Properties. Click Recording. Then check all check-boxes in Show the following volume controls list. Press OK.

6. Along the bottom of Recording Control dialog will be Select check-boxes. Uncheck all of them if it is possible or check the left one.



7. Adjust all mixer's sliders to max.



8. Arrange your workspace so you can see Midi2Wav window and Recording Control dialog.



9. In Midi2Wav window open Midi file and press Record.



10. Check the left Select check-box in Recording Control mixer, then the next one and so on, until a wave signal appears in Midi2Wav window .



11. Close Mixer window. Now you can use Midi2Wav Recorder.



http://www.xkee.com/midi2wav-recorder-download/faq.html

More information can be found online at http://www.xkee.com/midi2wav-recorder-download/faq.html