Personal Securer 3.00 – a GSM/GPRS/GPS unique in design and functionality device featuring the latest SiRFStar III GPS core technology – has a tri-banded (900/1800/1900) GSM unit
July 9, 2005 (Press Release) --
Personal Securer 3.00 – a GSM/GPRS/GPS unique in design and functionality device featuring the latest GPS technology – has a tri-banded (900/1800/1900) GSM unit and a movement sensor. The embedded field approved, state-of-the-art 20 channels, SiRFStar III GPS core technology offers more than 200,000 correlators used for processing digital signals and enables extremely fast and deep GPS signal search capabilities. In this way by acquiring signals down to -159 dBm Time-To-First-Fix is lowered to only seconds. All this gives amazing results in Personal Securer device movement between high buildings or in indoor or outdoor environments with lower satellite reception. The DESIGN of Personal Securer 3.00 is developed so as to make it easier for the user to locate the PANIC button in any stressful situation whatsoever. PANIC BUTTON activates the in-built 90 Db ALARM SIREN. The Personal Securer Call buttons can be programmed with two pre-defined numbers for setting up VOICE CONNECTION or for sending SMS. USB interface allows the Personal Securer battery to be directly charged via computer, at home or place of work, as well as local update of the device firmware. Further the Personal Securer 3.00 contains an extended standard embedded application that enables GPRS connectivity via TCP/IP protocol for exchanging data between the Personal Securer and a service centre in real time on given time intervals or on demand. Personal Securer unit provides its owner with original additional options – when connected to a computer, it can be used as GSM/GPRS modem for surfing in Internet or as GPS receiver including for navigation in your personal car. It is equipped with a Li-Ion battery. Personal Securer device is shock resistant. It has a fully functional eCos-based real-time operating system. Configuration of the Personal Securer device can be accomplished both remotely via SMS, DATA or GPRS, and locally via native USB interface. New features implemented in Personal Securer 3.00:
- New GPS Receiver - SiRF Star III chipset, availability for 20 channels, more than 200,000 correlators used for processing digital signals, extremely fast and deep GPS signal search capabilities, achieving time-to-first-fix in only seconds by acquiring signals down to –159 dBm.
hot start (open sky): < 1 sec., average;
hot start (15 dB-Hz): < 18 sec., average;
cold start (30 dB-Hz): < 42 sec., average
- A genuine PPP GPRS which via TCP/IP protocol sends data from the Personal Securer to a service center at a real time on given time intervals or on demand
- The update of the firmware can be configured now only via USB connection – it is not necessary the use of a service kit for reinstallation of the software.
- New GPS Receiver - SiRF Star III chipset, availability for 20 channels, more than 200,000 correlators used for processing digital signals, extremely fast and deep GPS signal search capabilities, achieving time-to-first-fix in only seconds by acquiring signals down to –159 dBm.
hot start (open sky): < 1 sec., average;
hot start (15 dB-Hz): < 18 sec., average;
cold start (30 dB-Hz): < 42 sec., average
- A genuine PPP GPRS which via TCP/IP protocol sends data from the Personal Securer to a service center at a real time on given time intervals or on demand
- The update of the firmware can be configured now only via USB connection – it is not necessary the use of a service kit for reinstallation of the software.
Email
Print
SPAM
