Jeff Nielsen endorses AngleBuster, an new tool for flooring installers. Jeff says AngleBuster saves time, saves money and increases accuracy.
September 9, 2006 (Press Release) --
Hurricane, UT - AngleBuster is an ingeniously profitable tool.
Just ask Jeff Nielsen of Salt Lake City, Utah
Nielsen is the owner/manager of a chain of flooring stores in the Salt Lake Valley. He has been using AngleBuster for the past several months.
“When I purchased my AngleBuster, I did not think it would save the time AngleBuster said it would ... I WAS WRONG!,” Nielsen said.
He recently completed a slate job with his assistant in 5 days that he planned on taking 7 days.
Nielsen stressed the importance of the time savings and accuracy with AngleBuster.
“I went up to Rock Springs, Wyoming to do a job that was 780 sq.ft.,” Nielsen said. “My price for installation was $6.25/sq.ft. Total job was $4,875.00. This was a slate job, installed over backerboard on a 45 degree angle (with insets) and a custom base board. I expected this job to take me and my helper 7 days to complete. We completed it in 5 DAYS. You do the math! It looks like we made an extra $278.58 per day, right?
5 days x $278.58 = $1,392.90.”
It is this savings that lead Nielsen to personally endorse AngleBuster.
“I think the $87.00 I paid for this tool was a very good investment,” he said.
Nieslen heralds AngleBuster as doing something more important than "saving the time and the money" on the job, it is the “accuracy.” "Every cut was right, the first time, every time," (Can you say no replacing the custom base board already installed?)
For more information about Nielsen visit his webpage at http://www.anglebuster.com/installerearns.html For more information on AngleBuster visit AngleBuster's Web site at http://www.anglebuster.com
Just ask Jeff Nielsen of Salt Lake City, Utah
Nielsen is the owner/manager of a chain of flooring stores in the Salt Lake Valley. He has been using AngleBuster for the past several months.
“When I purchased my AngleBuster, I did not think it would save the time AngleBuster said it would ... I WAS WRONG!,” Nielsen said.
He recently completed a slate job with his assistant in 5 days that he planned on taking 7 days.
Nielsen stressed the importance of the time savings and accuracy with AngleBuster.
“I went up to Rock Springs, Wyoming to do a job that was 780 sq.ft.,” Nielsen said. “My price for installation was $6.25/sq.ft. Total job was $4,875.00. This was a slate job, installed over backerboard on a 45 degree angle (with insets) and a custom base board. I expected this job to take me and my helper 7 days to complete. We completed it in 5 DAYS. You do the math! It looks like we made an extra $278.58 per day, right?
5 days x $278.58 = $1,392.90.”
It is this savings that lead Nielsen to personally endorse AngleBuster.
“I think the $87.00 I paid for this tool was a very good investment,” he said.
Nieslen heralds AngleBuster as doing something more important than "saving the time and the money" on the job, it is the “accuracy.” "Every cut was right, the first time, every time," (Can you say no replacing the custom base board already installed?)
For more information about Nielsen visit his webpage at http://www.anglebuster.com/installerearns.html For more information on AngleBuster visit AngleBuster's Web site at http://www.anglebuster.com
Email
Print
SPAM
