·New CPU support providing maximum choices for new-product development
·Eclipse tool suite with GNU is pre-built with example projects
April 1, 2007 (Press Release) --
At ESC SV Macraigor Systems LLC today announced additional support for several new processor chips in the ARM, PowerPC, AMD and Marvell families. The debugging and control of these chips will be supported by all Macraigor debug software solutions when used with the OCDemon family of products. The OCDemon products offer the industry’s most advanced, yet price-sensitive, solution for the designing, debugging and programming of hardware designs and application software.
Macraigor has added software support for the following processor chips:
-ARM Cortex-M3 family of CPUs produced by Luminary Micro and other manufacturers for use in high-performance, low-cost products such as wireless networking and automotive controls
-Freescale MPC 83xx PowerQUICC II Pro family of high-end communication and networking processors
-AMD Geode GX/LX processors used for embedding low-power, high-performance x86 architecture in consumer and industrial devices
-Marvell PXA3xx family (Monahans), the third generation of Intel’s XScale family, for high-end communication and video devices.
Briefs:
Advanced, Price-Sensitive Embedded Debug Solution
Macraigor Systems offers a complete Eclipse tool suite bundled with GNU tools and pre-built with example projects at no cost on the Macraigor Systems website.
The OCD Commander offers an easy-to-use debugger providing Graphical User Interface (GUI) access for manipulation of the CPU (run, halt, reset) and its associated registers and memories.
Industry-Leading Flash Programming Solution
The OCDemon Flash Programmer includes a GUI application for performing a variety of programming and debugging functions on flash parts.
Pricing & Availability
The OCDemon family of debug tools is immediately available for the ARM, AMD, Marvell and PowerPC processors. The OCDemon Flash Programmer, Flash Access and Target Access are each $500 for the first license, and incremental licenses are $100 USD each. JSCAN is $1895 and JTAG Commander is $395. The OCD Commander (an assembly-level software debugger) OCD Remote, and Eclipse and GNU tool suites are available at no charge from the Macraigor website.
###
Macraigor Systems LLC, OCDemon, OCD Flash Programmer and OCD Remote are trademarks or registered trademarks of Macraigor Systems LLC in the U.S. and/or internationally. All other trademarks and products are the property of their respective owners.
The URL for the full release is located at: http://www.macraigor.com/downloads/apam_pr.pdf
Media Contact:
Barbara Stewart
480-488-6909
patterson.com
Macraigor has added software support for the following processor chips:
-ARM Cortex-M3 family of CPUs produced by Luminary Micro and other manufacturers for use in high-performance, low-cost products such as wireless networking and automotive controls
-Freescale MPC 83xx PowerQUICC II Pro family of high-end communication and networking processors
-AMD Geode GX/LX processors used for embedding low-power, high-performance x86 architecture in consumer and industrial devices
-Marvell PXA3xx family (Monahans), the third generation of Intel’s XScale family, for high-end communication and video devices.
Briefs:
Advanced, Price-Sensitive Embedded Debug Solution
Macraigor Systems offers a complete Eclipse tool suite bundled with GNU tools and pre-built with example projects at no cost on the Macraigor Systems website.
The OCD Commander offers an easy-to-use debugger providing Graphical User Interface (GUI) access for manipulation of the CPU (run, halt, reset) and its associated registers and memories.
Industry-Leading Flash Programming Solution
The OCDemon Flash Programmer includes a GUI application for performing a variety of programming and debugging functions on flash parts.
Pricing & Availability
The OCDemon family of debug tools is immediately available for the ARM, AMD, Marvell and PowerPC processors. The OCDemon Flash Programmer, Flash Access and Target Access are each $500 for the first license, and incremental licenses are $100 USD each. JSCAN is $1895 and JTAG Commander is $395. The OCD Commander (an assembly-level software debugger) OCD Remote, and Eclipse and GNU tool suites are available at no charge from the Macraigor website.
###
Macraigor Systems LLC, OCDemon, OCD Flash Programmer and OCD Remote are trademarks or registered trademarks of Macraigor Systems LLC in the U.S. and/or internationally. All other trademarks and products are the property of their respective owners.
The URL for the full release is located at: http://www.macraigor.com/downloads/apam_pr.pdf
Media Contact:
Barbara Stewart
480-488-6909
patterson.com
Email
Print
SPAM
LEAVE A COMMENT
