Demand for coated fabrics is projected to increase 3.2 percent annually through 2010 to 680 million square yards.
April 24, 2007 (Press Release) --
Coated Fabrics industry forecasts to 2010 & 2015
US demand to reach 680 million square yards by 2010
Demand for coated fabrics is projected to increase 3.2 percent annually through 2010 to 680 million square yards. Gains will be driven in part by ongoing strength in the protective clothing and motor vehicle airbag markets. Rebounds in spending on capital projects and nonresidential building construction will also aid growth. Ongoing advances in coated fabric technology, including the use of thinner and more durable coatings, will also spur gains. However, further increases will be restrained by burgeoning competition from engineered textiles, which feature chemical treatments or coatings that are applied at the thread or fiber level rather than after the fabric has been produced.
Vinyl-coated fabrics to remain leading type
Of the three major fabric types, nonrubber- coated fabrics, including those coated with polyvinyl chloride (PVC), polyurethane or acrylic, accounted for the largest share of coated fabric sales in 2005, with more than 80 percent of demand value. Within this category, PVC-coated fabrics are the leading type, benefitting from good performance at a modest price in a wide variety of applications. Rubbercoated fabrics, including those coated with natural rubber, neoprene, silicone rubber or butyl rubber, will post above average gains through 2009, benefitting from the growth in motor vehicle airbags, industrial equipment and protective clothing. Fabric-backed wallcoverings are expected to post the strongest gains over the same period, due to product innovations and the rebound in nonresidential construction spending.
Coated nylon to pace gains by substrate
Coated fabrics made from polyester substrates will continue to be the most widely used product type through the forecast period, based on their low cost and versatility. However, sales of coated nylon, a stronger and lighter substrate that is often used in the production of high growth goods such as airbags and protective clothing, are projected to post stronger gains through 2009.
Protective clothing to post fastest market advances
In 2005, the motor vehicle market (e.g., accounted for the largest share of coated fabric demand, with 29 percent. The protective clothing market is projected to achieve the fastest growth rate through 2010, benefitting from increased demand for safety suits by the military, first responders and chemical and electronic industry workers. Other markets expected to post above-average growth include industrial equipment, awnings and canopies, and commercial tents.
For more information, Please visit : http://www.bharatbook.com/detail.asp?id=8062
or email us at : info@bharatbook.com
You can also call us at +91-(022)-2757 8668 or +91-(022)-2757 9131
For searching our huge collection of reports, Please visit :
http://www.bharatbook.com/general/customresearch.asp
US demand to reach 680 million square yards by 2010
Demand for coated fabrics is projected to increase 3.2 percent annually through 2010 to 680 million square yards. Gains will be driven in part by ongoing strength in the protective clothing and motor vehicle airbag markets. Rebounds in spending on capital projects and nonresidential building construction will also aid growth. Ongoing advances in coated fabric technology, including the use of thinner and more durable coatings, will also spur gains. However, further increases will be restrained by burgeoning competition from engineered textiles, which feature chemical treatments or coatings that are applied at the thread or fiber level rather than after the fabric has been produced.
Vinyl-coated fabrics to remain leading type
Of the three major fabric types, nonrubber- coated fabrics, including those coated with polyvinyl chloride (PVC), polyurethane or acrylic, accounted for the largest share of coated fabric sales in 2005, with more than 80 percent of demand value. Within this category, PVC-coated fabrics are the leading type, benefitting from good performance at a modest price in a wide variety of applications. Rubbercoated fabrics, including those coated with natural rubber, neoprene, silicone rubber or butyl rubber, will post above average gains through 2009, benefitting from the growth in motor vehicle airbags, industrial equipment and protective clothing. Fabric-backed wallcoverings are expected to post the strongest gains over the same period, due to product innovations and the rebound in nonresidential construction spending.
Coated nylon to pace gains by substrate
Coated fabrics made from polyester substrates will continue to be the most widely used product type through the forecast period, based on their low cost and versatility. However, sales of coated nylon, a stronger and lighter substrate that is often used in the production of high growth goods such as airbags and protective clothing, are projected to post stronger gains through 2009.
Protective clothing to post fastest market advances
In 2005, the motor vehicle market (e.g., accounted for the largest share of coated fabric demand, with 29 percent. The protective clothing market is projected to achieve the fastest growth rate through 2010, benefitting from increased demand for safety suits by the military, first responders and chemical and electronic industry workers. Other markets expected to post above-average growth include industrial equipment, awnings and canopies, and commercial tents.
For more information, Please visit : http://www.bharatbook.com/detail.asp?id=8062
or email us at : info@bharatbook.com
You can also call us at +91-(022)-2757 8668 or +91-(022)-2757 9131
For searching our huge collection of reports, Please visit :
http://www.bharatbook.com/general/customresearch.asp
Email
Print
SPAM
