Lost Foam Metal Casting Information and the process of Lost Foam Casting Just Released

FOR IMMEDIATE RELEASE
(Free-Press-Release.com) May 22, 2008 -- Hobart, Washington USA () May 22, 2008

Lost Foam Metal Casting Information and stats of Lost Foam Casting and the Lost FoamCasting Process can now be found at a new section on Metal Casting website that is all about Lost Wax Casting. The new Lost Foam Casting section can be accessed by users and non-users by visiting the following web address: http://www.metalcastingzone.com/lost-foam-casting/.

Here is an excerpt from the Lost Foam Metal Casting section page on Metal Casting Zone:

“Foam Shaping: The original foam pattern of the Polystyrene is generally molded or carved.

Carving Polystyrene: The formed foam or polystyrene is then carved using traditional carving tools or the new-age hot-wire cutting tools. It can also be sanded easily.

Injecting Polystyrene in a Mold: Polystyrene contains pentane as a blowing agent and is commonly used for beads. The beads are pre-extended, stabilized and then blown into the mold to form pattern sections. A steam cycle forces the beads to expand fully, after this the fuse together and then it undergoes an in-mold cooling cycle. The final shape if very complex, then it is molded in sections. A cluster is formed by aging and gluing together the shaped foam sections.

Preparing Final Mold (Investment) for Casting: Gates and Raisers are generally attached to the pattern, they are also the part of the casting as this helps reduce the shrinkage. Pouring, dipping or spraying are the different methods used for coating the foam cluster with ceramic investment. The reason for this coating is that it forms a barrier and helps to prevent the molten metal to penetrate or cause sand erosion while pouring. Structural integrity of the casting is protected thanks to the coating.”

The new Lost Foam Metal Casting webpage is there to provide users with all of the information they need on Lost Foam Casting and learning the basics of Lost Foam. It can be visited for free at: http://www.metalcastingzone.com/lost-foam-casting/. This new section of Lost Foam Casting information will continue to be updated with the latest and greatest information on the basics of Lost Foam Casting at: http://www.metalcastingzone.com.

About Metal Casting Zone: Metal Casting Zone is a Community Site that brings users into a deeper relationship with Metal Casting.

More information can be found online at http://www.metalcastingzone.com

Casting Wax     Lost Wax     Lost Wax Casting